Posts

Crafting Comfy

Pumpkin Wood Sign with Messy Bow

/12 Comments/in , , , , , , , , , , , , , , , , , , , /by

How absolutely adorable did this turn out!?!  I had an idea in my mind how I wanted it to look, but I didn’t know it would be THIS so darn cute!!

First I gathered my supplies and covered my lap desk with brown postage paper. I used a wooden pumpkin that I got at Dollar Tree, paper that I purchased at Hobby Lobby, orange paint Mod Podge, a sanding block, twine and ribbon that I already had on hand from random various places.  The first step was to take the panels off by using my heat gun to heat up the glue underneath and then pry them off.  Then I painted the pumpkin underneath orange.  I diluted the orange paint with some water.  I didn’t want it to be a really harsh orange color, then I wiped off the excess paint.  I really like the color that it created.  For the panels, I traced them on the back of my pumpkin paper and then cut them out.  Then I used Mod Podge to attach them to the front of my panels and then used a sanding block to make the sides even.  Then I put the panels back on with hot glue and took twine around the stem and kept it on with hot glue as well.  I made my “messy bow” with just some various ribbon and pearl strands I had laying around.  I really didn’t buy anything for this project.  It turned out just adorbs in my opinion!

 

 

Crafting Comfy

Updated Chunky Yarn Pumpkins!!

/0 Comments/in , , , , , , , , , , , , , , , , , , , /by
Read more
Crafting Comfy

Purple and Gold Dot Art on Wooden Circle

/0 Comments/in , , , , , , , , , , , , , , , , , /by

This was something that I really enjoyed doing.  I keep going back to doing these mandala’s because they really take a lot of patience and time.  I’m not the absolute best at them yet, but I do improve with each one.

First I gathered my supplies, and covered my craft table with a brown postage paper! I used a piece of round wood that I purchased at Hobby Lobby, black chalk paint, a white chalk pencil, a stencil, purple and gold paint, dotting tools, a few q-tips, and one that is always wet close by in case you make a mistake. First I painted my wood with black chalk paint. (I didn’t know I was going to share this, so I didn’t take pictures until I got a few steps in) Then I took my stencil, and centered it on the circle and drew the lines with my chalk pencil.  After that, I started in the center and I randomly drew out designs going outward with my dotting tools symmetrically and just hoped it would just look nice.  I am still a little shaky, but hope to improve with practice.  When it is all finished and dried, I just took a wet cloth and wiped off the white chalk marks. If you create one of these, I hope you share it with me.  I absolutely love to see other people’s mandala’s!!

www.craftingcomfy.com

Googly Eyed Black Pumpkin

/0 Comments/in , , , , , , , , , , , , , , , , , , , /by

This adorable Halloween themed pumpkin is extremely easy to make.   Any kiddos can do it with parents help, pretty much! Just gather up the supplies and have some fun!

First gather your supplies, and cover your lap area! The supplies are just the pumpkin, black chalk paint, different sized googly eyes and E6000 and a paint brush. First step was to paint the whole pumpkin with CHALK paint.  It’s important that you use chalk paint, so it doesn’t peel off.  After the paint dries, take E6000 and apply googly eyes randomly all over the pumpkin!  That’s it!  You just let that dry, and you have an adorable pumpkin.  You can add a bow at the top if you’d like as well.  This craft really isn’t too messy, and it’s SUPER simple to do with kiddos!

 

Pumpkin: Hobby Lobby – $4.20 https://www.hobbylobby.com/Fall-Thanksgiving/Decorations/Pumpkins/White-Pumpkin/p/80986642
Googly Eyes – Walmart – $5.51 https://www.walmart.com/ip/Paste-On-Standard-Oval-Googly-Eyes-80pk-Black-10-19mm/35669739
Black Chalk Paint – Hobby Lobby – $1.99 https://www.hobbylobby.com/search/?text=chalk+paint&quickview=80751097
E6000 – Walmart – $3.97 https://www.walmart.com/ip/Eclectic-E6000-Industrial-Adhesive-3-fl-oz-Clear-or-Transparent/44148643

Crafting Comfy

Button Acorn

/0 Comments/in , , , , , , , , , , , , , , , , , /by

Okay, so I’m going to be completely transparent here.  I don’t know if I like this one.  It’s kind of growing on me. When I finished it I literally thought “Well, they can’t all be winners”. But I’m posting it anyway!  I hope you are all staying safe, Healthy and HAPPY!!

First I started by gathering my supplies, as I always do and starting with a clean work space.  I used a piece of paper from Hobby Lobby that looked like real leaves.  I got a little decoration from Dollar General that looked like a little acorn, and I gathered a bunch of buttons and my E6000 and some raffia.  First I took the top of the acorn off and I put a piece of paper that was close to the size of the bottom of the acorn on there and I took a sanding block, and just took off the excess paper around the edges.  It came off really easy.  Then I just glued the paper down.  I then put the top of the acorn back on and just started covering it with buttons!  Then I made a little bow with raffia after I was done with the buttons and used hot glue to keep that on there.  It really was a super simple craft!

 

 

Crafting Comfy

Heart Button Sign

/0 Comments/in , , , , , , , , , , , , , , , , , , , /by

My daughter and I made two of these signs in February. My mom loved it, so I had to make her one too. I didn’t do step by step instructions back then, so I did them now. I hope you all like this! Stay safe, Healthy and HAPPY!!!

First I covered my lap table with postage paper. Then I gathered all the supplies. I used an 8×10 picture frame that I bought at Dollar Tree for $1.00.  I also used E6000, a heart cut out that I printed out online. (I will put a pdf of what I used below) I used a ton of various red buttons, red chalk paint and an 8×10 THIN canvas that I bought at Dollar Tree for $1.00 for a pack of 3.  I printed out my heart and cut it out.  Then I traced it on my canvas making sure I left room on the edges to where when I put the canvas back in the frame, the buttons wouldn’t be covered by the frame.  Then I started putting the buttons on the canvas where the heart goes.  The cheap buttons should go on the bottom.  They are the ones that won’t be seen.  You will need all sizes of buttons, and you will want all different kinds and shapes.  After I finished the bottom, I covered the top of the heart with the prettier buttons to make it look nice.  I painted the frame with chalk paint, so the paint wouldn’t peel off.  I took a sanding block and distressed the frame to make it look a little more farm house style.  Then I put the canvas into the frame after the paint dried, and it’s all finished!

 

                   

 

 

 

Heart PDF

Happy Fall Teal Pumpkin Sign

/0 Comments/in , , , , , , , , , , , , , , , , , /by

This sign might be small, but it packs a punch!!! It turned out way more adorable than I thought it was going to.  This is actually one of my favorites.  Maybe because fall is my favorite time of the year.  Now I get to try to top this! Yay!  So cute!  As always, I hope you are all staying safe, Healthy and HAPPY!

As always, first I started with a clean desk on my bed to craft with.  Then I gathered all of my supplies.  I used a small sign I had bought at Dollar General for $1.00, a little pumpkin embellishment I purchased at Hobby Lobby, cute paper I purchased at Hobby Lobby,  little wooden saying that says “Happy Fall” that I purchased at Hobby Lobby, Mod Podge, some ribbon, paint, scissors, hot glue gun, and paint brushes. First I took a pen and marked out the exact size of the inside of my sign.  Then I cut it out and used a small amount of Mod Podge on the sign all around the sides and inside and then place the paper down.  I painted my wooden “Happy Fall” saying white first, then when that dried I painted it with a metallic teal color.  I made sure to give it a full coverage.  I attached the pumpkin and the “Happy Fall” saying with hot glue right where I thought it would look right.  Then I made a “messy bow” by doing a criss cross pattern, then tying it in the middle and then cutting the ends off to be the right size.  Then I just attached the bow with hot glue as well!  Whoa-la!  I have an absolutely adorable sign now!!

 

Hanging Candle Wreath

/0 Comments/in , , , , , , , , , , , , , , , , , , , /by

I absolutely LOVE the way this turned out.  It looks so pretty hanging outside in the evening.  It hangs on any hook.  The decoration can be changed for any season, so in the winter, I can put greenery, and I can decorate for Valentines Day and Easter etc.  It’s absolutely perfect because when the batteries go out, I just change them!  Perfection!  This craft is absolutely SUPER simple.

First I started by taking the grapevine wreath, and then tying the ribbon that I cut in 3 pieces (equally) around the center of the wreath.  Then I took the wreath together at the top and I secured it together.  You should probably use a large safety pin and then secure it with hot glue.  Then you just put the bottom of a flower pot that fits perfectly in the bottom of it at the bottom and put your candles on top and decorate around with whatever you want for the season.  I used leaves for fall.

 

Pallet Pumpkins with Wooden Trucks

/0 Comments/in , , , , , , , , , , , , , , , , , /by

These adorable pallets started out as just tiny wood pallets (I forgot to take initial pictures of them, I’m sorry) and turned out to be perfect little pumpkins.  I used little squares of wood for the stems, and green floral wire for the leaves on the sides.  Then the wooden leaves on top I painted metallic red!  The wooden trucks with the pumpkins were the finishing touch. I hope you’re staying safe, Healthy and HAPPY!

First I started with a clean desk in my bed.  Then I gathered all of my supplies.  I used 3 mini pallets from Dollar Tree, orange paint, red metallic paint, wooden leaves, wooden trucks, wood squares from Dollar Tree, green floral wire, wood stain, paint brushes, and glue gun.  The first step I did was paint the pallets orange all over.  Then I stained three wooden blocks with wood stain.  I didn’t stain them darkly, though.  I painted the stain on, then wiped it off.  Then after the paint was dry, I attached the wooden blocks to the pallets with hot glue.  I then wound up the floral wire around a paint brush to curl it, and then cut it off and attached it to the top of the pumpkin with hot glue.  I then painted the 9 wooden leaves metallic red and let it dry.  I attached those to the tops of the pumpkins with hot glue after they were dry.  Then I added the little wooden trucks to the bottom with hot glue.  I purchased the wooden leaves and wooden trucks at Hobby Lobby.  I will attach links to everything I can find at the bottom as always. I also used raffia at the end and just tied it in the middle and attached with hot glue it and cut it on each side.

 

Room Name Sign For Girl

/0 Comments/in , /by

I made this sweet sign for my daughter’s room that we are redecorating. She absolutely loved it! You can’t see very well from my first set of pictures, but you can’t see the glitter or the details extremely well but I plan on retaking the pictures when I can take them outside. (It’s been raining today all day) I’ll post the retaken pictures then. I really hope this post finds everyone safe, Healthy and HAPPY!!! 🥰 🤗

First I started by covering my work space with my postage paper to make sure my lap desk keeps clean. Then I gathered up all of my supplies, I thought I would be using for this craft. I used 3 long paint stir sticks, wide craft sticks, paint, mod podge, glitter, stencils, E6000, wooden alphabet letters, wooden beads, twine, and various other supplies such as a glue gun, sanding block, heavy duty scissors, regular scissors, paint brushes, and a pencil.

The first step was to sand down all of the paint sticks. No one wants a splinter! Then I lined up the three paint sticks the way I liked the way they looked, and then turned them around. I took the craft sticks, after the stir sticks were lined up straight, and put a mark on one where it would hold across the three sticks, but not show the outline. So I marked it a little bit short on each side, but long enough to make sure to hold the three sticks together when I put the wood glue on to hold it. Then I used the one craft stick that I marked and marked the rest of the sticks that I used. (I used a total of 5 to hold mine) Then I put just a tad of hot glue on them and I used wood glue to hold it down.

Then I let it dry and then turned it over and painted the whole front and sides black. I dried that with a heat gun. I sat that to the side and painted my letters with two coordinating colors. This took two coats of paint, making sure each coat is dry before applying the next. Then I painted designs on top of each letter with the opposite color. I used a heat gun and dried that, then used the sanding block to make it look a little aged.

Then I did the tiny flower stencil along the bottom and top. Coloring the flowers purple and the vines green. The sides I stenciled larger flowers. After the paint on that dried, I applied a light layer of mod podge, then a very light dusting of light pink fine glitter. I let that dry, then I attached my letters to the front by applying wood glue to the back, then some hot glue to help keep it attached while the wood glue dries. To make the hanger, I used twine and wooden beads I painted different colors and used different sizes for a different look. I just tied knots between beads and used a good amount of hot glue at each end to hold it. I later went in with a staple gun and just reinforced it with a staple on each side, just in case.